Pricing Guide

HTV Single Color Cost Calculator: Cost Per Shirt and What to Charge

A free one-color HTV calculator that turns your vinyl roll price, design size, blank, and press time into a cost per shirt, a suggested price, and an order total.

By Craft Calculators Team Updated 6 min read
HTV Single Color Cost Calculator: Cost Per Shirt and What to Charge
In this guide

This free calculator prices a one-color heat transfer vinyl (HTV) shirt, hoodie, tote, or other blank. Type in what you paid for your vinyl, how big the design is, what the blank costs, and how long it takes to cut, weed, and press. The calculator shows the vinyl cost for the design, your full cost per item, a suggested price, and the total for the order.

Quick answer
  • Vinyl is usually the smallest cost on an HTV shirt. A 10" x 10" design off a $15.00 roll costs about $0.80 in vinyl.
  • Your blank and your time are the big costs, so count every minute of cutting, weeding, and pressing.
  • In the example below, a shirt that costs $10.23 to make should sell for about $15.

HTV single color cost calculator

Change any box. Results update as you type.

Your results

Vinyl cost per design–
Labor per item–
Cost per item–
Suggested price per item–
Order total–
Profit on the order–

Price is rounded up to the next whole dollar. Profit is after selling fees.

Need multi-color, glitter or team order pricing? See all HTV pricing calculators.

How to use this calculator

  1. Enter the price of the vinyl roll or sheet you cut from, plus its width and length. A 12" x 5 ft roll is 12 and 5.
  2. Measure the design at its finished size, not the size of your mat. Use the widest and tallest points.
  3. Leave waste at 10% to 20% to cover spacing, test cuts, and the vinyl you peel away when weeding.
  4. Add the cost of the blank and the minutes you spend per item from start to finish.
  5. Set your hourly rate, overhead, profit, and fees, then type the order quantity to see the full quote.

What goes into the cost of one HTV shirt

Every HTV item has four costs. The calculator adds them for you:

Cost What it covers Example (10" x 10" design)
Vinyl Design area plus waste, times your cost per square inch $0.80
Blank The shirt, hoodie, bag, or hat $4.50
Labor Cutting, weeding, and pressing at $20.00/hr 12 min = $4.00
Overhead Blade wear, Teflon sheets, power, software (10%) $0.93

Your roll works out to about 0.69 cents per square inch. That is why a bigger design adds less to the price than most people expect. Time is what adds up. Shaving three minutes off weeding saves more than switching to cheaper vinyl.

When to charge more

  • Glitter, holographic, puff, and other specialty HTV often cost two to three times as much as standard vinyl. Enter the specialty roll price to see the difference.
  • Fine lettering and small details take longer to weed. Raise your minutes, not your vinyl cost.
  • Each extra print location (front, back, sleeve) is another design. Price each one, or use a multi-location calculator.
  • Rush orders take time away from other work. Many sellers add 15% to 25%.

Worked example: 24 one-color shirts

A team orders 24 shirts with a 10" x 10" one-color logo. The vinyl comes from a 12" x 15 ft roll that cost $15.00. Blanks are $4.50 each, and each shirt takes 12 minutes.

Step Math Result
Cost per square inch $15.00 / (12 x 180 in) 0.69¢
Vinyl per shirt 10 x 10 + 15% waste = 115 sq in $0.80
Labor per shirt 12 min at $20.00/hr $4.00
Cost per shirt (vinyl + blank + labor) + 10% overhead $10.23
Suggested price +30% profit, then cover 10% fees $15
Order total 24 x $15 $360.00

Profit on the order after fees is about $78.52, on top of the $96.00 you paid yourself for labor.

HTV shirt price chart

Use this HTV shirt price chart as a starting point. It uses the same math as the calculator above: labor at $20/hr, 10% overhead, 30% profit and 10% fees. Change the inputs above to match your own blanks and speed.

Shirt Vinyl Blank Time Cost Suggested price
1-color tee, standard HTV $0.80 $4.50 12 min $10.23 $15
2-color tee, standard HTV $1.60 $4.50 20 min $14.04 $21
3-color tee, standard HTV $2.40 $4.50 28 min $17.86 $26
1-color tee, glitter HTV $2.00 $4.50 14 min $12.28 $18
1-color hoodie, standard HTV $0.80 $12.00 14 min $19.21 $28
Front + back tee, standard HTV $1.60 $4.50 22 min $14.78 $22

Mistakes to avoid

  • Pricing from vinyl alone. Vinyl is often under a dollar per shirt. The blank and your time are most of the cost.
  • Skipping weeding time. Time a few shirts with a timer. Detailed designs can double your minutes.
  • Forgetting reprints. A misprint costs a blank and vinyl. Your waste percent and overhead should cover the odd mistake.
  • Using the same price for every size. 2XL and up blanks cost more. Run the calculator again with the higher blank cost.
HTV Garment Pricing Calculator spreadsheet
The HTV Garment Pricing Calculator spreadsheet saves your numbers and takes this further.

Price every HTV order in one spreadsheet

The HTV Garment Pricing Calculator handles 1 to 4 colors, several blank types, bulk tiers, and wholesale prices, and you can save each quote.

See the HTV Garment Pricing Calculator

More calculators that help

Common questions

How much does the vinyl cost for one HTV shirt?

For a typical 10" x 10" design on standard HTV, vinyl is usually well under $1. In the example it is $0.80. Specialty vinyl like glitter or holographic can cost two to three times as much.

How much should I charge for a one-color HTV shirt?

Add the blank, vinyl, your labor, and overhead, then add profit and cover your fees. In the example that gives $15 per shirt. Your price will change with your blank cost and how fast you work.

What waste percent should I use for HTV?

Most makers use 10% to 20%. Use the high end for small or detailed designs and when you cut one design at a time.

Should I charge less for bulk HTV orders?

You can, because setup time is shared across more shirts and weeding gets faster. Keep the price above your full cost per shirt, and lower only the profit part.

Is HTV the same as heat transfers?

No. HTV is vinyl you cut and weed. Heat transfers, like DTF or screen print transfers, are printed sheets you press, and they are priced differently.

Get every calculator in one download

The Lifetime Spreadsheet Vault includes 500 editable calculators for candles, vinyl, tumblers, resin, baking, crochet, laser and more. Pay once, and every future spreadsheet is included.

See the Lifetime Vault
Share this guide: Save to Pinterest Facebook

Craft Calculators TeamWe build editable pricing spreadsheets for makers: 500+ calculators across 45 crafts, used by sellers on Etsy, at craft fairs and in their own shops. Every example in our guides is worked out in a real spreadsheet.

Lifetime Spreadsheet Vault

Stop guessing your prices. For every craft you sell.

  • 500+ editable pricing spreadsheets in 45 craft categories
  • Type your numbers in the peach cells. The math is done.
  • Works in Google Sheets, Excel and Numbers
  • Pay once. Every future spreadsheet is included.
Get the Vault $79 one time · 7-day money-back guarantee
Lifetime Spreadsheet Vault – 512 Pricing Tools, One Price