Millimeters Conversion Calculator: mm to Inches, Fractions and cm
A free mm converter for crafters. Type any length in millimeters and see it in inches, the nearest 1/16 inch fraction, centimeters, feet, yards, and meters.
In this guide
Laser files, 3D prints, jewelry findings, and many supplies are measured in millimeters, while rulers and cutting mats often use inches. This calculator converts any millimeter length into decimal inches, the nearest 1/16 inch fraction you can find on a ruler, centimeters, feet, yards, and meters.
- Divide millimeters by 25.4 to get inches.
- Divide millimeters by 10 to get centimeters.
- 75 mm is 2.953 inches, which is about 2 15/16" on a ruler.
Millimeters conversion calculator
Type a length in millimeters.
Your results
The fraction is rounded to the nearest 1/16 inch, which is about 1.6 mm.
How to use this calculator
- Type the length in millimeters. Decimals work, like 3.5.
- Use the decimal inches for software like Cricut Design Space or a laser program.
- Use the 1/16 inch fraction when measuring with a ruler or tape.
Common mm sizes in crafting
| Millimeters | Inches | Nearest fraction | Where you see it |
|---|---|---|---|
| 3 mm | 0.118 | 1/8" | Plywood and acrylic for laser cutting |
| 6 mm | 0.236 | 1/4" | Thick acrylic, beads |
| 10 mm | 0.394 | 3/8" | Beads, rhinestones (ss30 is about 6.4 mm) |
| 25 mm | 0.984 | 1" | Keychains, buttons |
| 50 mm | 1.969 | 1 15/16" | Badges, small ornaments |
| 100 mm | 3.937 | 3 15/16" | Coasters |
How accurate is a 1/16 inch fraction?
A 1/16 inch is about 1.59 mm, so a fraction can be off by up to 0.8 mm. That is fine for cutting fabric or vinyl. For laser parts, slots, or 3D prints that must fit together, use the decimal inches or stay in millimeters.
Worked example: sizing a coaster design
A coaster blank is 100 mm across. 100 / 25.4 = 3.937 inches, or about 3 15/16". If you want a 5 mm margin on each side, the design should be 90 mm, which is 3.543 inches in your design software.
Mistakes to avoid
- Using 25 instead of 25.4. It is close but off by 1.6%. On a 300 mm piece that is almost 5 mm.
- Using fractions for tight fits. For parts that must fit, use decimals or millimeters.
- Mixing mm and cm. Check the label. 10 mm = 1 cm.

Convert fractions, decimals, and mm in one sheet
The Inch Fraction, Decimal & Millimeter Converter rounds to the nearest 1/16 or 1/32 inch and includes a full chart for cutting and sewing.
See the Fraction & mm ConverterMore calculators that help
- Lengths: Convert inches, feet, yards, mm, cm, and meters. Use the Craft Length Converter – Inches, Feet, Yards, mm, cm & Meters for Vinyl, Fabric & Ribbon.
- Print size: Convert image pixels and DPI to print size. Use the Image Size, DPI & Print Size Converter – Pixels to Inches & cm, Quality Check for Sublimation & DTF.
- Area: Convert square mm, square inches, and square feet. Use the Craft Area Converter – Square Inches, Feet, Yards, cm & Meters with Width × Length List.
Common questions
How do I convert mm to inches?
Divide millimeters by 25.4. For example, 50 mm / 25.4 = 1.969 inches.
How many mm are in an inch?
There are exactly 25.4 mm in one inch.
What is 3 mm in inches?
3 mm is 0.118 inches, which is close to 1/8 inch.
How do I convert mm to cm?
Divide by 10. For example, 75 mm = 7.5 cm.
Why does my laser or Cricut use mm?
Millimeters are more precise for small sizes. You can switch most software between mm and inches in its settings.
Get every calculator in one download
The Lifetime Spreadsheet Vault includes 500 editable calculators for candles, vinyl, tumblers, resin, baking, crochet, laser and more. Pay once, and every future spreadsheet is included.
See the Lifetime VaultRelated guides
Lifetime Spreadsheet Vault
Stop guessing your prices. For every craft you sell.
- 500+ editable pricing spreadsheets in 45 craft categories
- Type your numbers in the peach cells. The math is done.
- Works in Google Sheets, Excel and Numbers
- Pay once. Every future spreadsheet is included.

